You meet my criteria compared

Defining Criteria

you meet my criteria compared

Melanie adds: If you are in a position to be evaluated, you need to know the criteria. If I don't share my criteria with you, it doesn't help you meet the criteria or . (2) If you develop more than one correlation curve that satisfy the performance Criteria Specified in section of this specification, you should use the point, you must compare the minimum value to the minimum PM CEMS response used to Your PM CEMS correlation must meet each of the minimum specifications in . You dig? / Mack, I'm going in / A millionaire, I'm a Young Money millionaire / Tougher than Nigerian hair / My criteria compared to your My criteria compared to your career just isn't fair I open the Lamborghini, hopin' them crackers see me.

Select the desired value from the list by clicking its associated link. When the Select a Constant page appears again, click the OK button, and the selected value appears in the List Members grid. Add Prompt Click to add one or more prompts to the list so that users can enter the comparison values when they run the query.

The prompts must be defined before you can select them. If no prompts have been defined, you will receive an error message. OK Click to accept the values that are listed in the List Members grid. You will return to the Edit Criteria Properties page, where the selected values are displayed in the Edit List page.

Criteria vs. Criterion: What’s the Difference? - Writing Explained

Cancel Click to return to the Edit Criteria Properties page without saving selections. Adding Prompts to an Expression List You can add one or more prompts to the expression list so that users can enter comparison values when they run a query.

You must have defined the prompts before you can add them to your expression list.

you meet my criteria compared

To add prompts to an expression list: Click the required prompt. The prompt appears on the Edit List page. If you selected the in list operator, you may want to add more than one prompt so that your users can enter more than one value to search for.

To add another prompt, click the Add Prompt link again and select a different prompt. Because you already have a prompt in place, a different page appears showing the prompt that you have already added.

To add the next prompt, click the New button and complete the Run-time Prompt page. The settings for this second prompt are the same as those that are used with the first prompt. If you want a different label for this prompt, enter that label in the Heading Text text box. When you click the OK button, the second prompt appears in the Available Prompts list. Highlight the second prompt, and click the Select button to add it to the list of comparison values.

The prompt then appears in the Edit List page.

you meet my criteria compared

Repeat this process for each prompt that you want to add. When you finish adding prompts, click the OK button to close the Edit List page. Adding Comparison Values to an Expression List When you select the Tree option as the comparison value available if you select the in tree or not in tree condition typethe Select Tree Node List page appears.

Criteria vs. Criterion: What’s the Difference?

Use this page to create a list of values for PeopleSoft Query to compare to the value from the first expression. If the Selected Nodes List has been previously populated, you can either: Change the tree by clicking the New Nodes List link. Open the previously selected tree, bypassing the Tree Selection page, by clicking the Edit Node List link.

you meet my criteria compared

Click the name of the tree that you want to display the Display and Select TreeNodes page, which you can use to select which element of the tree PeopleSoft Query will check. If no nodes have been previously selected, the Selected Nodes List grid is collapsed.

you meet my criteria compared

If you do not know the name of the tree, you can perform a search for the tree. Select a Tree page This example illustrates the fields and controls on the Select a Tree page. To select tree nodes: If you know the name of the node that you want, enter the name of the node in the Manual Selection drop-down list.

you meet my criteria compared

Alternatively, click the Look Up button to select the desired node from a list of available nodes. The nodes that you enter or select from the list appear in the Selected Nodes drop-down list. Remove nodes from the list by clicking the Remove from List icon corresponding to the node to be deleted. Display the selected tree branch by clicking the corresponding icon. When you are done selecting nodes, click OK. Defining a Criteria with Tree Prompt in PeopleSoft Query In addition to the option of selecting the tree value at design time for a criteria, Tree Prompts option will allow the user an option to select the tree and node value at run time.

Examples of query criteria

This allows the user to reuse the same query to get various organizational reports. In both web-based Query Manager and Windows client [psqed. Based on your selection, the tree option is handled to execute the query accordingly in the specified modules. When you select the Tree Prompt Option as the comparison value, all options to select tree values at design time are not available.

However, you are able to select tree values as criteria prompts when you run query. After the Tree Prompt Option is selected: The Criteria page has a same criteria prompt entry. When query is finally executed, based on the user's selection of tree and nodes when prompted, the SQL is modified accordingly with tree info in order to fetch rows of data.

When you access the Run page, you are prompted for selecting the tree for the specified field and its node list. Based on the tree node list that you selected, and after collecting the other prompt values, if any, the results are displayed on the Run page.

Query that has a criteria with tree prompts cannot be run as part of any process, either via Process Scheduler or from command line. For example, a crystal process which might need a query that has tree prompt to be executed to fetch data is not allowed either by scheduling a process in Process Scheduler or using psccrun. Although, you can execute the query with tree prompts from schedule query. This field, used throughout the PeopleSoft applications, provides a historical perspective enabling you to see how the data has changed over time.

Whenever users add a row of data to the table, they specify the date on which that data becomes effective; whenever users change a row of data, they specify a new effective date and the system retains the previous version of the row as history. If you do not know the data type of the foreign key, you can inspect the source table in Design view to determine the data types of the field.

Locate the source table in the Navigation Pane. Open the table in Design view by either: The data type for each field is listed in the Data Type column of the table design grid. In query Design view, this is represented in the Field List by using an expandable field. To use criteria for a multivalued field, you supply criteria for a single row of the hidden table.

Create a query containing the multivalued field, and open it in Design view. Just below the name of the field, you will see a field representing a single value of the multivalued field. This field will have the same name as the multivalued field, with the string. Drag the multivalued field and its single value field to separate columns in the design grid.

If you want to see only the complete multivalue field in your results, clear the Show check box for the single value field. Type your criteria in the Criteria row for the single value field, using criteria that is appropriate for whatever type of data the values represent. Each value in the multivalued field will be individually evaluated using the criteria you supply. For example, you may have a multivalued field that stores a list of numbers.